!Element No
!Element Name
!Element Picture
!Element Description
0
Dipole
image001.jpg
The default type, simple dipole element. Default Length = 0.48 λ
1
SQuad
image002.jpg
A square quad shape centred on the nominal boom. Driven point mid lower section. Default Length = 0.27 λ
2
Folded
image003.jpg
A simple square folded dipole distributed around nominal boom, Voltage source in lower wire. Default Length = 0.42 λ, Default VSpace = 0.075 λ
3
2Dipole
image004.jpg
Two identical dipoles one above the other distributed above and below nominal boom. A Passive element only. Default Length = 0.48 λ, VSpace = 0.3 λ
4
FoldedFlatF
image005.jpg
Square Folded Dipole laid flat (Horizontal). Driven wire at nominal spacing, other wire towards front of antenna. Nominal Boom through both elements. Default Length = 0.42 λ, HSpace = 0.075 λ
5
FoldedFlatB
image006.jpg
Square Folded Dipole laid flat (Horizontal). Driven wire at nominal spacing , other wire towards back of antenna. Nominal Boom through both elements. Default Length = 0.42 λ, HSpace = 0.075 λ
6
3Dipole
image007.jpg
Three identical dipoles above each other distributed above and below nominal boom. A Passive element only. Default Length = 0.48 λ, VSpace = 0.25 λ
7
4Dipole
image008.jpg
Four identical dipoles above each other distributed above and below nominal boom. A Passive element only. Default Length = 0.48 λ, VSpace = 0.2 λ
8
BentDipF
image009.jpg
Dipole with forward bend. In plain of nominal boom. Driven wire at nominal spacing , other wires bent towards front of antenna. Default Length = 0.38λ, Bend = 0.1 λ, Inner = 0.25 λ
9
BentDipB
image010.jpg
Dipole with backwards bend. In plain of nominal boom. Driven wire at nominal spacing , other wires bent towards back of antenna. Default Length = 0.38 λ, Bend = 0.1 λ, Inner = 0.25 λ
10
BentDipU
image011.jpg
Dipole with Upwards bend. Driven wire at nominal spacing , other wires bent up from antenna. Default Length = 0.38 λ, Bend = 0.1 λ, Inner = 0.25 λ
11
BentDipD
image012.jpg
Dipole with Downwards bend. Driven wire at nominal spacing , other wires bent down from antenna. Default Length = 0.38 λ, BendD = 0.1 λ, Inner = 0.25 λ
12
BentX
image013.jpg
X Shaped Dipole with bent arms. Driven wire at nominal spacing, other wires up and down from antenna. Default Length = 0.8 λ, Bend = 0.6 λ, Inner = 0.2 λ, Driven wire is fixed at 0.0125 λ.
13
RndFolded
image014.jpg
Approx. rounded end folded dipole distributed around nominal boom, Voltage source in lower wire. Default Length = 0.42λ, Default VSpace = 0.058 λ, Rad(R) of end circles =P1/2 End segs each 0.765*R
14
RndLoop
image015.jpg
Approx. rounded (Octagonal) loop on nominal boom, Voltage source in lower wire. Default Length = 0.32 λ, each octet side is 0.765*Radius
15
VarBowTie
image016.jpg
RSGB Style Skeleton Slot LENGTH=0.19λ Middle(P2)= 0.19λ Side(P1) = 0.29λ, Dual Square Quad LENGTH=0.25λ Middle(P2)= 0.25λ Side(P1)= 0.25λ, VK3DIP Semi-BowTie LENGTH =0.265λ Middle(P2)=0.19λ Side(P1)= 0.3125λ Defaults to VK3DIP Semi-BowTie
16
UBolt
UBolt.jpg
Simple U-Bolt model Default length and P1(Mouth) = 0.1Lambda 







